The heavy duty dust collector is a device used for industrial purposes to collect and absorb waste media particles, dust smoke, oil and water, etc. generated during production, operation, and transportation. When used in industry, users may encounter heavy duty dust collectors without The phenomenon of suction is mainly due to:

1. If the heavy duty dust collector has not been used for a long time and is not cleaned, the pores of the long dust collector will be blocked.

2. When the accessories are not well maintained, hoses, square ports, steel pipes, joints, etc. are worn, cracked, and air holes; these have a great relationship with the suction.

3. The heavy duty dust collector has been worn, and it will age over time, and the suction power will not be as good as the new machine.

4. On some uneven floors and carpets, some relatively heavy or difficult to suck, and strong suction is also required at this time.

5. Of course, the suction is strong, saving more time, and cleaners can improve work efficiency.

Inspection before use of heavy duty dust collector: Open the cover to check whether the dust bag is fastened, whether the suction port is fastened, and close the cover. Check the power supply voltage, and if necessary, pay attention to the forward and reverse rotation of the motor.

Replacing the belt: Some industrial vacuum cleaners with belt drive need to replace the conveyor belt, and open the rear door of the vacuum cleaner for replacement. If the belt is loose, open the side door and adjust the control nut to the proper position.

Matters needing attention during use: ordinary (non-explosion-proof) machines are strictly prohibited to be used in flammable and explosive places; non-special material filter bags cannot absorb burning fire and high-temperature waste; in the absence of dust filter bags and filters It is strictly forbidden to use it, otherwise it will directly cause damage to the fan; when the filter bag and filter are damaged, they should be replaced in time and cannot be used; the vacuum hose should not be squashed, stepped on, or worn; The temperature is high, especially after working continuously for a long time; the dust storage bucket should be cleaned up in time, and the filter bag and filter should be cleaned regularly to ensure smoothness; after the vacuum cleaner is overloaded, the thermal relay in the control box will Automatically cut off the power supply, at this time be sure to unplug the power plug, find out the reason, and use it after the thermal relay is reset; after the work is completed, the power supply should be cut off and placed in a cool and dry place. This extends the life of the heavy duty dust collector.

heavy duty dust collector https://www.kaisenfilter.com/Heavy-duty