Best Led strip lights in 2021

01. First clean the surface
First, you need to dry and clean the surface to place the led strip lights. Sometimes the place you want to keep the lights may be wet or not suitable.To get more news about neon light strip, you can visit htj-led.com official website.

A place where your babies can easily access is not a good option here. On the other hand, an area usually gets wet quickly is also not good.

Therefore you need to be careful and mindful when selecting a suitable place for placing the led strip.

Apart from that, the place you choose needs to be smooth and stable too.

02. Place the led strip light on the surface
Then you need to unroll the led strip and place it on the surface. Here you need to press each strip firmly on the surface. This is to get rid of any air bubbles that may form on the strip.

On the other hand, you can easily use clips to make it firm. Fixing clips will help the led strip lights to stay in place. In addition, you can also screw the clip to the surface for extra security.

03. Connect the strip
You are almost done. It is not that complex when you find the right approach.

So, after you stick the strip to the surface, you can connect it to a power adopter. Then, you can plug it easily.

So, that is all my friend. Now you can see the led strip lights lighting. On the other hand, you can also change the color of the lights using the remote controller.
Why led strip lights flicker?
This is one of the typical situations you need to face after installation. This is a nightmare you need to face after the installation process.

On the other hand, you may feel disappointed when you experience this after doing all the hard work. There are many reasons for this flickering effect of led strip lights.

Now, we will look at some of the significant reasons why led strip lights flicker.

Compatibility issues of Downlight and Dimmer
This is one of the most common issues for flickering. Here the issue arises when the downlights and dimmer are not matched.

On the other hand, many tend to use old dimmers when connecting with led downlights. This will undoubtedly cause compatibility issues and start flickering. You need to test this first before you connect it directly.

The testing will confirm the compatibility, and you can connect or replace them accordingly.

Above all, you need to use LED dimmers for LED downlights. On the other hand, we recommend you purchase quality dimmers always. It may cost somewhat higher than the normal ones.