Maintenance of working principle of butt fusion welding machine

Comments · 658 Views

working principle of butt fusion welding machine https://www.dowelding.com/Butt-Fusion-Machines

Speaking of it, it should be maintained for any object. Only after maintenance will the service life exceed expectations. So what is the maintenance of the working principle of butt fusion welding machine?

1. Please confirm the technical parameters on the plate of UN1S steel wire working principle of butt fusion welding machine to avoid unreasonable use.

2. Periodic maintenance of the working principle of butt fusion welding machine should be carried out at least every 6 months. Maintenance time 3-5 hours,

1) Machine head maintenance: clean carbon deposits, polish and polish the oxide layer, ensure good and reliable contact between copper conductors, and ensure enough contact surfaces.

2) Controller maintenance: check whether the buttons are sensitive, whether the data is correct, and whether the wire connectors are loose

3) Transformer maintenance: clean up dust, check whether the temperature rise, voltage is normal, and the wiring is firm.

3. Avoid overload use. Serious overload will burn the machine, and if it is not burned, the service life will be shortened.

Fourth, use a stable power supply voltage, unstable voltage will shorten the life of the welding machine.

working principle of butt fusion welding machine https://www.dowelding.com/Butt-Fusion-Machines

Comments